Spearcarb Saw Blade: 360mm to 1820mm (14 to 72 inches)
Solid bodied carbide tipped blade designed for arduous steel cutting applications
|
Body:
|
Chrome-Vanadium Steel
|
|
Tips:
|
Type K10 & K20 for non-ferrous materials, P25 - P45 (S6) for Steel
|
Speartipt: 180mm to 500mm (7 to 20 inches)
Solid bodied carbide tipped blade for cutting non-ferrous metals, woods and plastics. These tradesman blades are suitable for all portable power tools and small bench machines.
|
Body:
|
High specification chrome alloy steel
|
|
Tips:
|
Type ZAA & ZAAN - non ferrous positive and negative rake angles
Type R & RJ - Wood working ripping saws
Type T & Z - Trimming and parting of wood and plastic
Type PL & PLA - Trimming and Parting veneers, laminates and hard plastics
|
Blade Manufacture
Tips are brazed with high temperature silver braze and free flowing flux to ensure all contact faces are wetted offering maximum adhesion. Fine diamond grit grinding wheels are used for a exceptionally smooth finish which results in less chip resistance and faster cutting.
Blade Design
The body materials have been selected to provide toughness and resilience and to support the carbide under heavy load. All blades are levelled and tensioned to give optimum performance at running speeds.
The tooth geometry is designed to suit the application with positive or negative rake angles, triple chip and chip breakers. We have a range of standard tooth geometry's or can produce a custom design to suit customer requirements.
Spear & Jackson Service
Manufacture and supply of segmental and solid bodied TCT saw blades and supply of spare tips.
Comprehensive resharpening and repair service
Technical advice on feed, speed, blade specification, repair, etc.
Recommendations on our Spearmist Spray System and coolants.
